Netapp

Creating a Volume

• aggr show_space and chose an aggr
• vol create vol12_dhs_syslog_ashna3_nas -l en aggr6_1TB_SAS_SATA 500g to create the new volume on that aggr
• snap sched vol12_dhs_syslog_ashna3_nas 0 0 0 to set snapshot schedule to none
• snap reserve vol12_dhs_syslog_ashna3_nas 0 to set snapshot reserve space to 0
• qtree create /vol/vol12_dhs_syslog_ashna3_nas/ashsyslog02 to create a qtree if needed

Add qtree to exports file: /vol/vol12_dhs_syslog_ashna3_nas/ashsyslog02 -sec=sys,rw,root=10.252.0.31:server_ip,nosuid

Snap Sched

dsnetapp14> snap sched vol1_dhs_vm_datastore_dsna14_nas
Volume vol1_dhs_vm_datastore_dsna14_nas: 0 2 6@8,12,16,20

This means:

• keep 0 weekly snapshots
• create a snapshot every day and keep a max of 2
• Create snapshots at 0,12,16,20 hours every day, and keep at most 6

Snapmirrors

Do this on the destination netapp, not source To Break:

• snapmirror quiesce <volname>
• snapmirror break <volname>

To Resync:

• snapmirror resync <volname>

Increase Inodes for a Volume

• maxfiles vol13_boats_imtimages_dsna2_nas 23499996

Luns

    [root@ashmon1 log]# ssh ashnetapp03 "lun show" | grep vol1_aa_sql1_sqldata7_ashna3_san
    /vol/vol1_aa_sql1_sqldata7_ashna3_san/sqldata7.lun  320.0g (343619297280)  (r/w, offline, mapped)

See how the lun was offline.

You increase the space in the volume and then do a "lun online /vol/vol1_aa_sql1_sqldata7_ashna3_san/sqldata7.lun"

    [root@ashmon1 log]# ssh ashnetapp03 "lun show" | grep vol1_aa_sql1_sqldata7_ashna3_san
    /vol/vol1_aa_sql1_sqldata7_ashna3_san/sqldata7.lun  320.0g (343619297280)  (r/w, online, mapped)

Luns on server side

• To view where a lun is mounted: sanlun lun show -p