Fedora

From KeegansWiki
Revision as of 08:43, 11 September 2013 by Keegan (talk | contribs)
Jump to navigation Jump to search

VNC Desktop

  • yum install tigervnc-server
  • vncserver :1 -geometry 800x600 -depth 24

Reinstall Grub After Windows Install

mkdir -p /mnt/temp/boot
vgchange -a y
lvdisplay
mount /dev/VolGroup00/LogVol00 /mnt/temp
mount /dev/sda5 /mnt/temp/boot
grub-install --root-directory=/mnt/temp /dev/sda

HDMI Audio for Fedora 18

  • Add user to audio group
  • edit /etc/default/grub, add radeon.audio=1 to the GRUB_CMDLINE_LINUX line, before rdgb
  • grub2-mkconfig -o /boot/grub2/grub.cfg
  • reboot

Installing Wireless HotKey for HP 6450b

The button above the keyboard on my HP ProBook 6450b which enables and disables wireless was nonfunctional, with this error:

Sep 29 11:32:43 localhost kernel: atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
Sep 29 11:32:43 localhost kernel: atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
Sep 29 11:32:43 localhost kernel: HP WMI: Unknown response received
Sep 29 11:32:43 localhost kernel: atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
Sep 29 11:32:43 localhost kernel: atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.

Running lspci -nnk showed

44:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1509]

Drivers are not installed.

Installation

Now lspci -nnk shows:

44:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
        Subsystem: Hewlett-Packard Company Device [103c:1509]
        Kernel driver in use: wl
        Kernel modules: wl

And it works fine.

Setting up ISCSI targets

  • iscsiadm -m discovery -t sendtargets -p 192.168.1.100
  • iscsiadm -m node
  • iscsiadm -m node -T iqn.2011-5.com.thecus:RAID.iscsi1.vg0.vmware -p 192.168.1.100 --login
  • /etc/fstab:
    • /dev/sde1 /mnt/vmware ntfs defaults,auto,_netdev 0 0
  • OR use blkid to get the uuid, then put it in fstab

Mounting Windows Share

  • mount -t cifs //jersey/chunky -o username='foo',password='bar' /mnt/chunky
[root@lenny ~]# grep cifs /etc/fstab
//jersey/Chunky         /mnt/chunky             cifs    credentials=/etc/cifspw 0 0
[root@lenny ~]# cat /etc/cifspw
username=foo
password=bar

Totem Cannot play x264

yum install gstreamer1* --exclude=*devel,*docs