Difference between revisions of "Tools"
Jump to navigation
Jump to search
(Created page with "=How-Tos= ==Band Saw== * Remove table when doing full tune up * Glue tires to Wheels if they slip ===Tune-up=== * Deepest part of blade gullet should be in center of wheel * S...") |
(No difference)
|
Latest revision as of 08:31, 22 February 2016
How-Tos
Band Saw
- Remove table when doing full tune up
- Glue tires to Wheels if they slip
Tune-up
- Deepest part of blade gullet should be in center of wheel
- Set tension before adjusting guides
- Tap blade, no more than 1/8" movement
- front of guides should be 1/16th" behind deepest part of gullet
- thrust bearing (sits behind blade, keeps fro moving back when sawing??) should be as close as possible without touching
- very slight pressure on front of blade should make both thrust bearings turn
- side bearings, as close as possible without touching